DPC-T1-side-closed_250x250

DPC-T1 TRAILER TO CARRY 6 DPC PUSH CARTS

ByIn Place Technology Administrator

DPC-T1 Trailer for transporting Display Push Carts

DPC-T Trailers are very specially designed for easy transportation of display push carts. The spring-assisted ramp in the back of the trailer folds down effortlessly and allows a gradual slope to push the carts onto the trailer. Once in position, the carts are locked into place one-by-one with a clever fold-down lever design on the trailer side rails. With this locking system, it is possible to load carts on uneven ground and not have them roll off the back of the trailer.

See it Now
Nursery Haulers
DPC-T1-back-ISO-open_250x250

Similar Posts

FD5-EXT-front-iso_250x250

FD5 24″ Heavy-Duty Two-Wheel Dolly

ByIn Place Technology Administrator

FD5 24″ Nursery and Tree Dolly The FD5 heavy-duty dolly makes it ideal for hauling trees, ductwork, pipes, long boxes, and tall containers. The 24″ deck and rack are perfectly designed for 24″ round containers and buckets as well as 24″ boxes. The dolly is equipped with trailer spindles, hubs and tires to easily haul…

FWTL-10-D20-front-high_250x250

FWTL-10-D20 TRAILER ADDITIONAL REMOVABLE MESH DECK 20 INCHES TALL

Bymarven6-wpadmin

PRODUCT SPOTLIGHT FWTL-10-D20 The additional removable shelves are designed to be bolted in place onto the FWTL and FWTL-10 trailers. These shelves are perfect for doubling the load area of our most popular nursery and agricultural trailers. The deck size mimics that of the trailer deck below and is constructed of the same heavy-gauge materials…

NWB3-rear-high_250x250

NWB3 26 X 58 Nurseryman’s Wheelbarrow

ByIn Place Technology Administrator

NWB3 26″ wide x 58″ long Heavy Duty Nurseryman’s Wheelbarrow Nurseryman’s Wheelbarrows are used in applications from greenhouses to grow fields and everywhere in between. The workhorses offer tremendous mobility and capacity. The NWB3 is designed with a heavy-duty 16 gauge solid steel deck with weep holes in each corner. Flat-free tires with steel wheels…

HF-10-16DIAM-front-ISO_250x250

Hedge Form for 10″ to 16″ Diameter

ByIn Place Technology Administrator

HF-10-16DIAM Hedge Form Tool HEDGE FORM FOR 10″ DIAMETER CAN CREATING A 16″ DIAMETER ROUND HEDGE. SAFETY RED Make your nursery stand out from the crowd by sculpting hedges quickly and easily using the Hedge Form. The HF-16-24DIAM is designed to quickly be placed on top of a 16″ diameter can, and creates a simple…

CH3-side_250x250

Can Handler Dolly for 1 – 15 Gallon

ByIn Place Technology Administrator

CH3 Heavy-Duty Can Handler Dolly for 1 to 15 gallon containers The CH3 Can Handler Dolly is a heavy-duty short-design dolly for hauling 1-gallon to 15-gallon containers and buckets. The unique carriage frames the containers so they remain stable during transport. With a 400 Lb capacity and flat-free tires, this dolly will provide you with…

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.